性能特點/Features

1.  研磨程序采用機械按鍵+歐姆龍旋轉式繼電器+進口調速器，使 

    工藝品質更易于控制。
2. 研磨夾具采用四角加壓，由彈性墊的壓入量決定研磨壓力，操 
    作簡單，產品加工精度高且一致性好。
3. 可生產符合IEC標準的幾何端面。
4. 采用行星軌跡研磨方式，研磨轉速可隨意調整（110轉每分）。
5. 使用新的I.P.C夾具（每個插芯可獨立加壓）技術使工業生產合
    格率更高，并且無論是研磨一個或40個連接頭，研磨效果相
    同，操作靈活性高。
6. MU和LC連接頭最大可研磨40T，SC，F(xiàn)C，ST連接頭最大可達32T。
7. 使用高品質熱處理過的不銹鋼，是機器保持了非常高的精確性

    和實用性。

1.   Polishing procedure adopt mechanic button and Omron rotary relay. It makes the 
     methodology quality be more controllable.
2.   Polishing fixture adopt four coil pressure type. The pressure is controlled by the 
      four coils.It makes the product precision better and more consistent in quality.
3.   It can produce the geometric surface meet the IEC standard requirements.
4.   The polishing trails obey the planet orbit. Polishing rotation speed is adjustable 
      with normally 110RPM.
5.   Use new I.P.C polishing fixture (every ceramic ferrule can be loaded independently) 
      technology ensure the high qualified rate of production. The polishing results are 
      the same no matter polish one or 40pcs polishing connectors.
6.   Maximum polishing capacity reaches 40pcs for MU and LC connectors. And for 
      SC, FC, ST. it reaches 32pcs.
7.   The high quality stainless steel material after heat-treatment ensures the high 
      precision & durability of the machine.

技術參數：

電壓：AC220-240V

頻率：50/60Hz

總功率：200W

總質量：28Kg

外形尺寸：250x230x260mm

研磨底盤直徑：127mm

研磨傳動：合金雙電機齒輪

研磨跳動: ±0.005mm

研磨轉速：每分鐘0-110轉

控制方式；機械按鍵+歐姆龍旋轉式繼電器+進口調速器          

Technical data:

Voltage: AC220-240V

Frequency: 50/60Hz

Power: 200W

Weight: 28Kg

Size: 250x230x260mm

Polishing disc dia. 127mm

Polishing driven: Annoy double motors gear driving

Polishing jumping: ±0.005mm

Polishing rotation speed: 80RPM

Control method: Mechanic button + Omron rotary relay