1、用于連接器裝配及陶瓷插芯金屬尾座及其他產品的壓接裝配。
2、使用氣壓不小于0.6~0.9Mpa,最大壓力為1000kgf。
3、通過更換壓接工裝，可適應不同的零件裝配及壓接。
4、壓力可調整，適應不同產品。
5、操作簡單、可靠，加工效率高。
6、加工質量穩定。
7、維護、保養簡單方便。
8、可提供連接器壓接模、適配器及金屬尾座壓接模。

9、可根據客戶需要，定制不同的壓接工裝。

1.   For the connector assembly and the ceramic ferrule and metal tail stock assembly 
     of other products crimp.
2.  Use air pressure is not less than 0.6 ~ 0.9 Mpa, the maximum pressure for 1000 kgf.
3. By replacing the crimp tooling, can adapt to different parts assembly and the  
     crimping.
4.  Pressure can be adjusted to adapt to different products.
5.  Simple, reliable, high processing efficiency.
6.  Stable quality.
7.  Maintenance, simple and convenient.
8.  Provide the connector crimping dies, adapters and metal tailstock pressure dies.
9.  According to customer needs, custom-made different crimping tooling.