本機為微電腦式拉力試驗機，主要由電氣和機械兩部分組成；機械部分以電氣部分之電機為原動力，利用電機之正反轉，通過蝸輪與減速機將速度降到試驗所需之速度，再經絲桿傳動，帶動中聯板上下移動配合夾具實現夾具之拉壓過程。試樣經拉伸、壓縮、撕裂或其它形式的破壞后可由顯示器上直接讀出拉力、壓力值、撕裂力值、位移或其它形式的力值，以求得所需之試樣之物性。 

This machine is a microcomputer-type tensile testing machine, which is mainly composed of electrical and mechanical parts. The mechanical part is driven by the motor of the electric part. With the positive and negative rotation of the motor, the speed is reduced to the speed required for the test by the worm wheel and the reducer. After the screw drive, the middle and lower plates are moved to cooperate with the clamp to realize the tension and compression process of the clamp. After the sample is stretched, compressed, torn or otherwise damaged, the tensile force, pressure value, tearing force value, displacement or other form of force value can be directly read from the display to obtain the physical properties of the desired sample.

容量:50KG 
荷重精度:±1%（示值相對誤差）
測試速度:無級調速： 50～300mm/min任意調節
傳動控制方式:中空鑄鋁蝸輪減速
電源:單相220V  50HZ
夾具:光纖跳線專用夾具
保護裝置:漏電短路保護，上下極限位置保護，荷重過載保護
延伸量測:日本萊茵編碼器+標尺
顯示器:液晶顯示器
打印方式:自動打印報表（中文打?。纱蛴∽畲笤囼灹χ?、平均值、自由取點及每點對應位移、斷點比率、日期等